发表的教科研论文

[1]李辉,刘凤利.新型减振端铣刀的实验研究.唐山工程技术学院学报,1994,16(4):16~22

[2]李辉.一种基于零件加工特征的几何建模方法.石家庄铁道学院学报,1996,9(2):77~80

[3]李辉,蔺树义.精密细直径不锈钢焊管设备的研制.钢管,1996,25(2):45~46

[4]李辉,蔺树义.焊管轧辊CAD/CAPP系统的开发.钢管,1996,25(3):26~28

[5]李辉,蔺树义.不锈钢焊管的生产工艺及设备. 钢管,1996,25(1):4~5

[6]李辉,张日水,王满元.减振面铣刀CAD系统的开发.哈尔滨科学技术大学学报,1996,20(1):11~15

[7]李辉,刘凤利.可编程序控制器在飞锯控制中的应用.河北理工学院学报,1996,18(4):44~46

[8]李辉,蔺树义.程控不锈钢焊管飞锯的研制.焊管,1997,20(1):42~43

[9]李辉,刘芬.高级语言、工程数据库和图形编辑App的一体化.价值工程,1997,4

[10]刘芬,李辉.Sun工作站汉字系统的开发.价值工程,1997.4

[11]李辉.新型减振端铣刀的优化设计.中国建设科技文库,工程机械类,1997

[12]李辉,刘凤利.模块式可转位减振端铣刀CAD.工具技术,1998,32(4):23~25 (EI 98074298397)

[13]李辉,刘凤利.一种圆度误差评定的计算机新算法.石家庄铁道学院学报,1998,11(3):50~53

[14]李辉.程控焊管飞锯的开发.焊管,1998,21(5):17~20

[15]李辉.焊管设备CAD系统设计.钢管,1998,27(6):46~48

[16]李辉,廉胜余.热镀铝不锈钢电焊管的生产技术.焊管,1998,21(1):44~45

[17]李辉,刘凤利.直线度误差评定快速算法.机械工程师,1998(3):26~27

[18]李辉.不锈钢筷子的生产工艺及设备.钢管,1999,28(4):19~19

[19]李辉,刘丽萍,张培良.机床主传动系统优化设计.石家庄铁道学院学报,1999,(2):6~8

[20]李辉,刘凤利.插齿刀CAD/CAPP集成系统.工具技术,1999,33(11):17~19 (EI 00045122617)

[21]刘凤利,李辉.不等齿距端铣刀的计算机辅助设计.机械工程师,1999(9):43~44

[22]李辉,刘凤利,王战中.不等齿距端铣刀的减振机理.振动与冲击,1999,18(3):62~66

[23]李辉,刘凤利.方矩形钢管轧辊CAD.石家庄铁道学院学报,1999,12(1):36~39

[24]李辉,刘凤利.Visual Basic5.0 与AutoCAD R14的接口设计.价值工程,1999.4

[25]刘凤利,李辉,郭铁锁.插齿刀CAD/CAPP系统的开发.河北理工学院学报,2000.22(2):69~75

[26]李辉,张策,孟宪举.基于特征的焊管轧辊CAD系统开发.重型机械,2001(4):23-25

[27]李辉.基于几何特征和约束的轧辊计算机设计.焊管,2002,25(3):27~29

[28]李辉, 刘凤利.波浪形椭圆焊管轧辊设计.钢管,2002,31(4):44~46

[29]李辉,张策,孟宪举.平面五杆机构类型判别方法的研究.机械设计,2002,19(5):21~23

[30]刘芬,李辉.车床主传动系统的计算机辅助设计.现代制造工程,2002(7),56~58

[31]李辉,张策,孟宪举.混合驱动压力机运动设计的初步探讨.机械设计与研究,2002,18(增刊):218~219

[32]孟宪举,张策,李辉.二自由度可控六杆机构.机械设计与研究,2002,18(增刊):113~114

[33]李 辉,张策,卞学良.轧辊孔型和轮廓的计算机辅助设计系统的开发.计算机辅助设计与图形学学报,2002,14(10):993~996

[34] 李永刚,孟彩芳,张策,李辉.两自由度多环混合驱动机构的可动性分析.机械设计.,2003,20(9):17~19

[35]李辉,刘凤利.不等齿距端铣刀对端铣振动影响的研究.机械科学与技术,2003,22(3):408~417

[36]李辉,刘芬.等腰梯形焊管孔型设计.焊管,2003,26(2) :44~45

[37]李 辉,刘彦伟.一种不等边六边形焊管轧辊的孔型设计.焊管,2003,26(3):39~41

[38]张宇平,李 辉.轧辊类零件CAD/CAPP集成系统的研究.现代制造工程,2003(4):23~25

[39]李辉,张宇平.基于MDT的焊管轧辊特征造型设计.机械工程师,2003(6):19~21

[40] Yang Tongqiang,Tang Liwei, Zhang Ce, Song Yimin, Li, Hui, Meng Xianju. Acoustic signal processing for gearbox faults diagnosis.  Proceedings of the Second International Symposium on Instrumentation Science and Technology, v 3, 2002, p 3/743-3/746 (EI03427680374, ISTP)

[41] Yang Tongqiang, Tang Liwei, Song Yimin, Zhang Ce, Li Hui, Hong Lin. Design and analysis of the effect for the sound-insulating mantle. Proceedings of the International Symposium on Test and Measurement, v 1, 2003, p 345~347 (EI03427681945, ISTP)

[42] Li Hui, Zhang Yuping, Liu Fengli, Yang Tongqiang.The Measurement and Analysis of the Noise Spectrum of Optical Machine. Proceedings of the International Symposium on Test and Measurement(ISTM/2003),2003:1939~1942, (EI03427678869,ISTP)

[43] Li Hui, Zhang Yuping, Liu Fengli, Yang Tongqiang.Vibration and noise source monitoring of a vertical milling machine. Proceedings of the International Symposium on Test and Measurement(ISTM/2003),2003,711~714, (EI03427682042,ISTP)

[44]李辉,袁长明,王战中.螺旋槽盘形铣刀刃形数学模型的建立与仿真.机械科学与技术,2003,22(增刊):89~92

[45]李辉,孟宪举,张岳文.混合驱动五杆机构的构型和连杆曲线变化规律的研究.机械科学与技术,2003,22(6):962~965

[46]李辉,李振涛.混合输入五杆机构的构型及可动性的研究.石家庄铁道学院学报,2003,16(4):30~33

[47]李辉,王素霞.混合驱动机构的轨迹特性和成组轨迹综合的研究.95992828九五至尊2学报,2003,2(4):1~7

[48]李辉,张宇平.混合驱动可控机构研究的进展.95992828九五至尊2学报,2004,3(1):1~6

[49]李辉,张策.混合驱动精压机的优化设计和运动仿真.计算机辅助设计与图形学学报,2004,16(2):211~215 (EI04298268852)

[50]李辉.混合驱动精压机的动力学分析与仿真.计算机辅助设计与图形学学报,2004,16(5):666~670 (EI04318292045)

[51] Li Hui ,Zhang Ce,Meng Caifang. A Hybrid-driven Nine-bar Press for Precision Drawing. Proceedings of the 11th World Congress in Mechanism and Machine Science,Tianjin,China,2004,4:1141~1145 (ISTP)

[52]李 辉, 张 策, 孟彩芳.基于正运动学分析的混合驱动压力机优化设计.中国机械工程,2004,15(9):771~774

[53] Li Hui, Zhang Ce. Study on the classification and synthesis of the programmable mechanism. Proceedings of The 6th International Conference on Frontiers of Design and Manufacturing, Xi’an, China, 2004.6

[54] Li Hui, Zhang Yuping. Study on the vibration-free mechanism of unequal blade spacing face-milling cutter. Proceedings of The 6th International Conference on Frontiers of Design and Manufacturing, Xi’an, China, 2004.6

[55] Li Hui, Zhang Ce. Optimum synthesis and simulation of the hybrid-driven mechanical press. Proceedings of The 6th International Conference on Frontiers of Design and Manufacturing, Xi’an, China, 2004.6

[56] Li Hui, Zhang Ce. Dynamics modeling and simulation of the hybrid-driven mechanical press. Proceedings of The 6th International Conference on Frontiers of Design and Manufacturing, Xi’an, China, 2004.6

[57]李辉, 张 策, 宋轶民.混合驱动七杆压力机的动力学建模. 机械设计与研究,2004,20(增刊):291~293

[58]李辉, 张 策, 宋轶民.混合驱动压力机滑块运动规律的设计.机械设计与研究,2004,20(增刊):244~246

[59]李辉.实现变传动比成组轨迹的混合驱动机构的综合.机械设计与研究,2004,20(3):58~60

[60]李辉.混合驱动可控压力机的创新设计.机械设计,2004,21(7):31~33

[61]孟宪举,李辉.精确实现给定轨迹的混合驱动五杆机构.河北理工学院学报,2004,26(2):18~22

[62]李辉.焊管轧辊CAD/CAPP技术的应用.焊管,2004,27(4):35~37

[63]李辉.混合驱动压力机正运动学分的研究.现代制造工程,2004(8):90~92

[64]李辉,张宇平.隧道掘进机的火情报警系统.中国科学学报,2004,1(9):25~27

[65]李辉, 张宇平.半圆形焊管轧辊的孔型设计.焊管,2004,27(5):38~40

[66]李辉,张策.混合驱动压力机的可行性研究.机械科学与技术,2004,23(10):1253~1256

[67]李辉.焊管轧辊特征造型系统的研究与开发.钢管,2004,33(5):35~38

[68] Li Hui, Zhang Yuping. Research on the feature modeling technology for welded tube roll. Proceedings of The International Conference on Manufacturing and Automation, Wuhan, China, 2004.10,111~116 (EI05389374107,ISTP)

[69] Li Hui. Optimum performance of hybrid-driven mechanical press based on inverse kinematics. Proceedings of The China Association for Science and Technology,Shanghai, China, 2004.11,Vol.1:220~225 (ISTP)

[70]李辉.基于拓扑分析的机构创新设计方法的研究.机械科学与技术,2004,23(12):1440~1443

[71]李 辉,郑海起,杨通强.基于相关包络分析的轴承故障诊断研究.振动、测试与诊断,2004,24(增刊):239~242(EI05159040008)(军)

[72]李辉.混合驱动拉深压力机运动学优化综合与仿真.机械科学与技术,2005,24(2):168~171

[73]李 辉,郑海起,唐力伟.基于EMD和包络谱分析的轴承故障诊断研究.河北工业大学学报,2005,34(1):11~15(军)

[74]李 辉,郑海起,唐力伟. 基于EMD和Wigner分布的轴承故障诊断研究. 石家庄铁道学院学报,2005,18(2):10~14(军)

[75] 李辉, 张 策, 宋轶民,孟彩芳.可控压力机的动力学建模和仿真.机械工程学报,2005,41(3):180~184 (EI05179069782)

[76] Li Hui ,Zhang Ce,Meng Caifang. Hybrid-driven Nine-bar Press for Precision Drawing. Chinese Journal of Mechanical Engineering, 2004,17 (Supplement):197~200 (EI05249161622)

[77] H.Li, H.Q.Zheng, L.W.Tang.Faults Monitoring and Diagnosis of Ball Bearing Based on Hilbert-Huang Transformation. Key Engineering Material, 2005,Vol.291-292: 649~654 (军)(SCI)

[78] H.Li, H.Q.Zheng, L.W.Tang.Hilbert-Huang Transform and its Application in Gear Faults Diagnosis. Key Engineering Material, 2005,Vol.291-292: 655~660 (军)(SCI)

[79] Li Hui, Zhang Yuping, Zheng Haiqi. A Method for Detecting Bearing Faults UsingHilbert-Huang Transform. Proceedings of the International Symposium on Test and Measurement (ISTM/2005), Dalian, China, 2005 , Vol.5, 4110~4114 (ISTP)

[80] Li Hui, Zhang Yuping, Zheng Haiqi. Application of Cyclostationary Analysis to Faults Detection of Gear Crack. Proceedings of the International Symposium on Test and Measurement (ISTM/2005), Dalian,China,2005,Vol.5,4530~4533  (ISTP)

[81] Li Hui, Zheng Haiqi, Tang Liwei. Adaptive Instantaneous Frequency Estimation of MultiComponent Signals Using Hilbert-Huang Transform. Proceedings of the International Symposium on Test and Measurement(ISTM/2005), Dalian,China,2005, Vol.6,5049~5052 (军)(ISTP)

[82] Li Hui, Zheng Haiqi, Tang Liwei. Hilbert-Huang Transform for Detecting Crack Faults in Geared System. Proceedings of the International Symposium on Test and Measurement(ISTM/2005), Dalian,China,2005, Vol.1,276~279 (军)(ISTP)

[83] Man Honggao, Li Hui. Application of EMD and Wigner-Ville Distribution to Faults Diagnosis of Bearing. Proceedings of the International Symposium on Test and Measurement(ISTM/2005), Dalian,China,2005,Vol.9,8481~8484 (ISTP)

[84]李 辉, 张立臣,郑海起,唐力伟. Hilbert-Huang变换能量谱在轴承故障诊断中的应用. 军械工程学院学报,2005,17(4):37~40

[85]李辉, 张宇平. 混合驱动压力机动态静力分析研究.现代制造工程,2005(7):4~6

[86]张宇平,李辉.不等边五边形焊管轧辊的计算机辅助设计,焊管,2005,28(4):50~53

[87] Li Hui, Zhang Yuping. Empirical Mode Decomposition Technique for Elimination of Cross-terms in Wigner-Ville Distribution. Proceeding of 7th International Conference on Electronic Measurement & Instruments (ICEMI’2005), Beijing, China, 2005, Vol.6, 229-232 (ISTP)

[88] Li Hui, Zhang Yuping. Application of Energy Spectrum of Hilbert-Huang Transform to Faults Diagnosis of Roller Bearing. Proceeding of 7th International Conference on Electronic Measurement & Instruments (ICEMI’2005), Beijing, China, 2005, Vol.8, 203-206 (ISTP)

[89]李辉,郑海起,唐力伟. 应用Hilbert-Huang变换的齿轮磨损故障诊断研究,振动、测试与诊断,2005,25(3):200~204 (EI05449453785)

[90]李辉,郑海起,唐力伟. 基于EMD和功率谱的齿轮故障诊断研究,振动与冲击,2006,25(1):133~135,145 (EI06229912481)

[91]李辉,潘宏侠,郑海起. Hilbert-Huang变换在行星齿轮箱故障诊断中的应用,测试技术学报,2006,20(2):144~149

[92] Li Hui, Zhang Yuping, Zheng Haiqi. Application of EMD-AR spectrum to gear faults diagnosis. Proceedings of The 7th International Conference on Frontiers of Design and Manufacturing, Guang Zhou, China, 2006.6,Vol.2:97~100

[93]李 辉,郑海起,唐力伟. Hilbert-Huang变换在齿轮裂纹故障诊断中的应用,机械强度,2006,28(增刊):40~43

[94] Hui Li and Yuping Zhang. Bearing Faults Diagnosis Based on EMD and Wigner-Ville Distribution,Proceedings of The 6th World Congress on Intelligent Control and Automation (WCICA06), Dalian, China, 2006.6, Vol.7:5447~5451(EI071510543512ISTP)

[95]李 辉,郑海起,唐力伟.基于阶次双谱的齿轮箱升降速过程故障诊断研究,中国机械工程,2006,17(16):1665~1668 (EI064310201436)

[96]李辉,郑海起,唐力伟. 声测法和经验模态分解在轴承故障诊断中的应用,中国电机工程学报,2006,26(15):124~128 (EI064010140975)

[97]李 辉,郑海起,唐力伟.阶次边频带分析的齿轮故障诊断方法, 振动、测试与诊断,2006,26(增刊):201~204 (EI070110349451)

[98]李 辉,郑海起,唐力伟. EMD 和AR谱分析在轴承故障诊断中的应用, 振动、测试与诊断,2006,26(增刊):205~208 (EI070110349452)

[99] Hui Li, Haiqi Zheng, Liwei Tang. Wigner-Ville Distribution Based on EMD for Faults Diagnosis of Bearing. Lecture Notes in Computer Science,2006,4223:803~812 (SCIEI064510224244)

[100]李辉, 张宇平.数控技术专业产学研结合教育研究与实践.职业技术,2006,18:23

[101] Li Hui, Zhang Yuping. Angle Domain Average and Continuous Wavelet Transform for Gear Fault Detection. Proceedings of the 9th International Symposium on Advances in Abrasive Technology (ISAAT2006). Dalian, China, 2006.9

[102] Li Hui, Zheng Haiqi, and Tang Liwei. Machine Tool Fault Detection Based on Order Cepstrum. Proceedings of the 9th International Symposium on Advances in Abrasive Technology (ISAAT2006). Dalian, China, 2006.9

[103] Li Hui, Zhang Yuping. Optimum Design and Experimental Investigation of Unequal Blade Spacing Face-milling Cutter. Proceedings of the 9th International Symposium on Advances in Abrasive Technology (ISAAT2006). Dalian, China, 2006.9  ISSN:095806928X

[104] Li Hui, Zheng Haiqi, and Tang Liwei. Study on Faults Diagnosis of Bearing for machine tool Based on EMD and Envelope Analysis. Proceedings of the 9th International Symposium on Advances in Abrasive Technology (ISAAT2006). Dalian, China, 2006.9

[105] Shufeng Ai, Hui Li.  Application of Order Cepstrum and Neural Network to Gear Fault Detection. Proceedings of IMACS Multiconference on Computational Engineering in Systems Applications. Bejing, China, 2006.10 : 1822-1827  (EI)

[106] Hui Li, Yuping Zhang and Haiqi Zheng. Wear Detection in Gear System Using Hilbert-Huang Transform. Journal of Mechanical Science and Technology (KSME Int.J.), 2006,20(11):1781~1789 (SCI)

[107]李 辉,郑海起,唐力伟.基于倒阶次谱分析的齿轮故障诊断研究,振动与冲击,2006,25(5):65~68 (EI065010305022)

[108]李 辉,郑海起,唐力伟.阶次倒谱在轴承故障诊断中的应用,数据采集与处理,2006,21(4):454~458 (EI070710428291)

[109]李 辉,郑海起,潘宏侠.基于EMD的电机瞬时转速和转矩测量,中北大学学报,2006,27(6):491~494 (EI070910461619)

[110]李 辉,郑海起,潘宏侠.基于阶次跟踪和角域平均的齿轮裂纹故障诊断, 中北大学学报,2007,28(1):27~31 (EI071510545519)

[111]李辉,郑海起,唐力伟. 基于经验模态分解的瞬时相位分析方法的应用,振动、测试与诊断,2007,27(1):9~12 (EI071710572204)

[112]李辉,郑海起,唐力伟. 齿轮箱升降速过程阶次倒谱故障诊断方法研究,湖南科技大学学报,2007,22(1):30~33

[113]李 辉,郑海起,唐力伟. 阶次包络谱在轴承故障诊断中的应用,机械强度,2007,29(3):351~355 (EI072710692459)

[114]李 辉,郑海起,唐力伟. 基于瞬时频率估计的齿轮箱升降速信号阶次跟踪,振动、测试与诊断,2007,27(2):125~128 (EI073110727757)

[115]Li Hui, Zhang Yuping, Zheng Haiqi. Order Bi-coherence Spectrum Based Gear Fault Detection During Speed-up. Proceedings of 7th International Symposium on Test and Measurement (ISTM/2007), Beijing, China, 2007, Vol.5, 3930~3933 (ISTP)

[116]Li Hui, Zhang Yuping, Zheng Haiqi. Angle Order Analysis Technique for Processing Non-stationary Vibrations. Proceedings of 7th International Symposium on Test and Measurement (ISTM/2007), Beijing, China, 2007, Vol.5, 4000~4003 (ISTP)

1返回

XML 地图 | Sitemap 地图