骨干教师近5年发表的教科研论文

[1] 李辉.基于几何特征和约束的轧辊计算机设计.焊管,2002,25(3):27~29

[2] 李辉, 刘凤利.波浪形椭圆焊管轧辊设计.钢管,2002,31(4):44~46

[3] 李辉,张策,孟宪举.平面五杆机构类型判别方法的研究.机械设计,2002,19(5):21~23

[4] 刘芬,李辉.车床主传动系统的计算机辅助设计.现代制造工程,2002(7),56~58

[5] 李辉,张策,孟宪举.混合驱动压力机运动设计的初步探讨.机械设计与研究,2002,18(增刊):218~219

[6] 孟宪举,张策,李辉.二自由度可控六杆机构.机械设计与研究,2002,18(增刊):113~114

[7] 李 辉,张策,卞学良.轧辊孔型和轮廓的计算机辅助设计系统的开发.计算机辅助设计与图形学学报,2002,14(10):993~996

[8] 李永刚,孟彩芳,张策,李辉.两自由度多环混合驱动机构的可动性分析.机械设计.,2003,20(9):17~19

[9] 李辉,刘凤利.不等齿距端铣刀对端铣振动影响的研究.机械科学与技术,2003,22(3):408~417

[10] 李辉,刘芬.等腰梯形焊管孔型设计.焊管,2003,26(2) :44~45

[11] 李 辉,刘彦伟.一种不等边六边形焊管轧辊的孔型设计.焊管,2003,26(3):39~41

[12] 张宇平,李 辉.轧辊类零件CAD/CAPP集成系统的研究.现代制造工程,2003(4):23~25

[13] 李辉,张宇平.基于MDT的焊管轧辊特征造型设计.机械工程师,2003(6):19~21

[14] Yang Tongqiang,Tang Liwei, Zhang Ce, Song Yimin, Li, Hui, Meng Xianju. Acoustic signal processing for gearbox faults diagnosis.  Proceedings of the Second International Symposium on Instrumentation Science and Technology, v 3, 2002, p 3/743-3/746 (EI03427680374, ISTP)

[15] Yang Tongqiang, Tang Liwei, Song Yimin, Zhang Ce, Li Hui, Hong Lin. Design and analysis of the effect for the sound-insulating mantle. Proceedings of the International Symposium on Test and Measurement, v 1, 2003, p 345~347 (EI03427681945, ISTP)

[16] Li Hui, Zhang Yuping, Liu Fengli, Yang Tongqiang.The Measurement and Analysis of the Noise Spectrum of Optical Machine. Proceedings of the International Symposium on Test and Measurement(ISTM/2003),2003:1939~1942, (EI03427678869,ISTP)

[17] Li Hui, Zhang Yuping, Liu Fengli, Yang Tongqiang.Vibration and noise source monitoring of a vertical milling machine. Proceedings of the International Symposium on Test and Measurement(ISTM/2003),2003,711~714, (EI03427682042,ISTP)

[18] 李辉,袁长明,王战中.螺旋槽盘形铣刀刃形数学模型的建立与仿真.机械科学与技术,2003,22(增刊):89~92

[19] 李辉,孟宪举,张岳文.混合驱动五杆机构的构型和连杆曲线变化规律的研究.机械科学与技术,2003,22(6):962~965

[20] 李辉,李振涛.混合输入五杆机构的构型及可动性的研究.石家庄铁道学院学报,2003,16(4):30~33

[21] 李辉,王素霞.混合驱动机构的轨迹特性和成组轨迹综合的研究.95992828九五至尊2学报,2003,2(4):1~7

[22] 李辉,张宇平.混合驱动可控机构研究的进展.95992828九五至尊2学报,2004,3(1):1~6

[23] 李辉,张策.混合驱动精压机的优化设计和运动仿真.计算机辅助设计与图形学学报,2004,16(2):211~215 (EI04298268852)

[24] 李辉.混合驱动精压机的动力学分析与仿真.计算机辅助设计与图形学学报,2004,16(5):666~670 (EI04318292045)

[25] Li Hui ,Zhang Ce,Meng Caifang. A Hybrid-driven Nine-bar Press for Precision Drawing. Proceedings of the 11th World Congress in Mechanism and Machine Science,Tianjin,China,2004,4:1141~1145 (ISTP)

[26]李 辉, 张 策, 孟彩芳.基于正运动学分析的混合驱动压力机优化设计.中国机械工程,2004,15(9):771~774

[27] Li Hui, Zhang Ce. Study on the classification and synthesis of the programmable mechanism. Proceedings of The 6th International Conference on Frontiers of Design and Manufacturing, Xi’an, China, 2004.6

[28] Li Hui, Zhang Yuping. Study on the vibration-free mechanism of unequal blade spacing face-milling cutter. Proceedings of The 6th International Conference on Frontiers of Design and Manufacturing, Xi’an, China, 2004.6

[29] Li Hui, Zhang Ce. Optimum synthesis and simulation of the hybrid-driven mechanical press. Proceedings of The 6th International Conference on Frontiers of Design and Manufacturing, Xi’an, China, 2004.6

[30] Li Hui, Zhang Ce. Dynamics modeling and simulation of the hybrid-driven mechanical press. Proceedings of The 6th International Conference on Frontiers of Design and Manufacturing, Xi’an, China, 2004.6

[31] 李辉, 张 策, 宋轶民.混合驱动七杆压力机的动力学建模. 机械设计与研究,2004,20(增刊):291~293

[32] 李辉, 张 策, 宋轶民.混合驱动压力机滑块运动规律的设计.机械设计与研究,2004,20(增刊):244~246

[33] 李辉.实现变传动比成组轨迹的混合驱动机构的综合.机械设计与研究,2004,20(3):58~60

[34] 李辉.混合驱动可控压力机的创新设计.机械设计,2004,21(7):31~33

[35] 孟宪举,李辉.精确实现给定轨迹的混合驱动五杆机构.河北理工学院学报,2004,26(2):18~22

[36] 李辉.焊管轧辊CAD/CAPP技术的应用.焊管,2004,27(4):35~37

[37] 李辉.混合驱动压力机正运动学分析的研究.现代制造工程,2004(8):90~92

[38] 李辉,张宇平.隧道掘进机的火情报警系统.中国科学学报,2004,1(9):25~27

[39] 李辉, 张宇平.半圆形焊管轧辊的孔型设计.焊管,2004,27(5):38~40

[40] 李辉,张策.混合驱动压力机的可行性研究.机械科学与技术,2004,23(10):1253~1256

[41] 李辉.焊管轧辊特征造型系统的研究与开发.钢管,2004,33(5):35~38

[42] Li Hui, Zhang Yuping. Research on the feature modeling technology for welded tube roll. Proceedings of The International Conference on Manufacturing and Automation, Wuhan, China, 2004.10,111~116 (EI05389374107,ISTP)

[43] Li Hui. Optimum performance of hybrid-driven mechanical press based on inverse kinematics. Proceedings of The China Association for Science and Technology,Shanghai, China, 2004.11,Vol.1:220~225 (ISTP)

[44] 李辉.基于拓扑分析的机构创新设计方法的研究.机械科学与技术,2004,23(12):1440~1443

[45] 李辉,郑海起,杨通强.基于相关包络分析的轴承故障诊断研究.振动、测试与诊断,2004,24(增刊):239~242(EI05159040008)(军)

[46] 李辉.混合驱动拉深压力机运动学优化综合与仿真.机械科学与技术,2005,24(2):168~171

[47] 李辉,郑海起,唐力伟.基于EMD和包络谱分析的轴承故障诊断研究.河北工业大学学报,2005,34(1):11~15(军)

[48]李辉,郑海起,唐力伟. 基于EMD和Wigner分布的轴承故障诊断研究. 石家庄铁道学院学报,2005,18(2):10~14(军)

[49] 李辉, 张 策, 宋轶民,孟彩芳.可控压力机的动力学建模和仿真.机械工程学报,2005,41(3):180~184 (EI05179069782)

[50] Li Hui ,Zhang Ce,Meng Caifang. Hybrid-driven Nine-bar Press for Precision Drawing. Chinese Journal of Mechanical Engineering, 2004,17 (Supplement):197~200 (EI05249161622)

[51] H.Li, H.Q.Zheng, L.W.Tang.Faults Monitoring and Diagnosis of Ball Bearing Based on Hilbert-Huang Transformation. Key Engineering Material, 2005,Vol.291-292: 649~654 (军)(SCI)

[52] H.Li, H.Q.Zheng, L.W.Tang.Hilbert-Huang Transform and its Application in Gear Faults Diagnosis. Key Engineering Material, 2005,Vol.291-292: 655~660 (军)(SCI)

[53] Li Hui, Zhang Yuping, Zheng Haiqi. A Method for Detecting Bearing Faults UsingHilbert-Huang Transform. Proceedings of the International Symposium on Test and Measurement (ISTM/2005), Dalian, China, 2005 , Vol.5, 4110~4114 (ISTP)

[54] Li Hui, Zhang Yuping, Zheng Haiqi. Application of Cyclostationary Analysis to Faults Detection of Gear Crack. Proceedings of the International Symposium on Test and Measurement (ISTM/2005), Dalian,China,2005,Vol.5,4530~4533  (ISTP)

[55] Li Hui, Zheng Haiqi, Tang Liwei. Adaptive Instantaneous Frequency Estimation of MultiComponent Signals Using Hilbert-Huang Transform. Proceedings of the International Symposium on Test and Measurement(ISTM/2005), Dalian,China,2005, Vol.6,5049~5052 (军)(ISTP)

[56] Li Hui, Zheng Haiqi, Tang Liwei. Hilbert-Huang Transform for Detecting Crack Faults in Geared System. Proceedings of the International Symposium on Test and Measurement(ISTM/2005), Dalian,China,2005, Vol.1,276~279 (军)(ISTP)

[57] Man Honggao, Li Hui. Application of EMD and Wigner-Ville Distribution to Faults Diagnosis of Bearing. Proceedings of the International Symposium on Test and Measurement(ISTM/2005), Dalian,China,2005,Vol.9,8481~8484 (ISTP)

[58] 李 辉, 张立臣,郑海起,唐力伟. Hilbert-Huang变换能量谱在轴承故障诊断中的应用. 军械工程学院学报,2005,17(4):37~40(军)

[59]李辉, 张宇平. 混合驱动压力机动态静力分析研究.现代制造工程,2005(7):4~6

[60] 张宇平,李辉.不等边五边形焊管轧辊的计算机辅助设计,焊管,2005,28(4):50~53

[61] Li Hui, Zhang Yuping. Empirical Mode Decomposition Technique for Elimination of Cross-terms in Wigner-Ville Distribution. Proceeding of 7th International Conference on Electronic Measurement & Instruments (ICEMI’2005), Beijing, China, 2005, Vol.6, 229-232 (ISTP)

[62] Li Hui, Zhang Yuping. Application of Energy Spectrum of Hilbert-Huang Transform to Faults Diagnosis of Roller Bearing. Proceeding of 7th International Conference on Electronic Measurement & Instruments (ICEMI’2005), Beijing, China, 2005, Vol.8, 203-206 (ISTP)

[63]李 辉,郑海起,唐力伟. 应用Hilbert-Huang变换的齿轮磨损故障诊断研究,振动、测试与诊断,2005,25(3):200~204 (EI05449453785)

[64]李辉,郑海起,唐力伟. 基于EMD和功率谱的齿轮故障诊断研究,振动与冲击,2006,25(1):133~135,145 (军)(EI06229912481)

[65]李辉,潘宏侠,郑海起. Hilbert-Huang变换在行星齿轮箱故障诊断中的应用,测试技术学报,2006,20(2):144~149

[66]Li Hui, Zhang Yuping, Zheng Haiqi. Application of EMD-AR spectrum to gear faults diagnosis. Proceedings of The 7th International Conference on Frontiers of Design and Manufacturing, Guang Zhou, China, 2006.6,Vol.2:97~100

[67]李 辉,郑海起,唐力伟. Hilbert-Huang变换在齿轮裂纹故障诊断中的应用,机械强度,2006,28(增刊):40~43

[68] Hui Li and Yuping Zhang. Bearing Faults Diagnosis Based on EMD and Wigner-Ville Distribution,Proceedings of The 6th World Congress on Intelligent Control and Automation (WCICA06), Dalian, China, 2006.6, Vol.7:5447~5451(EI071510543512ISTP)

[69]李 辉,郑海起,唐力伟.基于阶次双谱的齿轮箱升降速过程故障诊断研究,中国机械工程,2006,17(16):1665~1668 (EI064310201436)

[70]李辉,郑海起,唐力伟. 声测法和经验模态分解在轴承故障诊断中的应用,中国电机工程学报,2006,26(15):124~128 (EI064010140975)

[71]李 辉,郑海起,唐力伟.阶次边频带分析的齿轮故障诊断方法, 振动、测试与诊断,2006,26(增刊):201~204 (EI070110349451)

[72]李 辉,郑海起,唐力伟. EMD 和AR谱分析在轴承故障诊断中的应用, 振动、测试与诊断,2006,26(增刊):205~208 (EI070110349452)

[73]Hui Li, Haiqi Zheng, Liwei Tang. Wigner-Ville Distribution Based on EMD for Faults Diagnosis of Bearing. Lecture Notes in Computer Science,2006,4223:803~812 (军)(SCIEI064510224244)

[74]李辉, 张宇平.数控技术专业产学研结合教育研究与实践.职业技术,2006,18:23

[75] Li Hui, Zhang Yuping. Angle Domain Average and Continuous Wavelet Transform for Gear Fault Detection. Proceedings of the 9th International Symposium on Advances in Abrasive Technology (ISAAT2006). Dalian, China, 2006.9

[76] Li Hui, Zheng Haiqi, and Tang Liwei. Machine Tool Fault Detection Based on Order Cepstrum. Proceedings of the 9th International Symposium on Advances in Abrasive Technology (ISAAT2006). Dalian, China, 2006.9

[77] Li Hui, Zhang Yuping. Optimum Design and Experimental Investigation of Unequal Blade Spacing Face-milling Cutter. Proceedings of the 9th International Symposium on Advances in Abrasive Technology (ISAAT2006). Dalian, China, 2006.9  ISSN:095806928X

[78] Li Hui, Zheng Haiqi, and Tang Liwei. Study on Faults Diagnosis of Bearing for machine tool Based on EMD and Envelope Analysis. Proceedings of the 9th International Symposium on Advances in Abrasive Technology (ISAAT2006). Dalian, China, 2006.9

[79] Shufeng Ai, Hui Li.  Application of Order Cepstrum and Neural Network to Gear Fault Detection. Proceedings of IMACS Multiconference on Computational Engineering in Systems Applications. Bejing, China, 2006.10 : 1822-1827  (EI)

[80] Hui Li, Yuping Zhang and Haiqi Zheng. Wear Detection in Gear System Using Hilbert-Huang Transform. Journal of Mechanical Science and Technology (KSME Int.J.), 2006,20(11):1781~1789 (SCI)

[81]李 辉,郑海起,唐力伟.基于倒阶次谱分析的齿轮故障诊断研究,振动与冲击,2006,25(5):65~68 (EI065010305022)

[82]李 辉,郑海起,唐力伟.阶次倒谱在轴承故障诊断中的应用,数据采集与处理,2006,21(4):454~458 (EI070710428291)

[83]李 辉,郑海起,潘宏侠.基于EMD的电机瞬时转速和转矩测量,中北大学学报,2006,27(6):491~494 (EI070910461619)

[84]李 辉,郑海起,潘宏侠.基于阶次跟踪和角域平均的齿轮裂纹故障诊断, 中北大学学报,2007,28(1):27~31 (EI071510545519)

[85]李 辉,郑海起,唐力伟. 基于经验模态分解的瞬时相位分析方法的应用,振动、测试与诊断,2007,27(1):9~12 (EI)

[86]李 辉,郑海起,唐力伟. 齿轮箱升降速过程阶次倒谱故障诊断方法研究,湖南科技大学学报,2007,22(1):30~33 (EI)

 

[87]霍俊仪(第一),世纪星组态App在机械手控制中的应用,95992828九五至尊2学报:2005,4(2):11-14

[88]霍俊仪(第一),进行实验室联合、提高学生动手能力,沿海企业与科技:2005,(8):183

[89]霍俊仪(第四),db3小波神经网络与通信信号调制识别,河北省科学院学报:2005,22(增刊):55-57

[90]霍俊仪(第一),电气控制与PLC技术仿真教学探讨,中国科技信息:2005.(12):86

[91]霍俊仪(第一),基于Visual Graph的电气控制仿真,95992828九五至尊2学报:2006,5(2):68-70

[92]常玮(第一),ADO在SLS加工仿真系统中的应用,机床与液压No.2,2006,P197-199

[93]常玮(第三)带隶属度及权重的粗糙集模型的构建,95992828九五至尊2学报 VOL5.No.2,2006,P51-54

[94]常玮(第三)高锰酸钾在消失模铸造涂料中的应用,内燃机配件,2006年第4期,P27-28

[95]袁长明、李立增。高原严寒地区隧洞施工组织管理技术,岩土工程理论与实践河北省岩石力学与工程学会编,P54-57

[96]袁长明、李立增。高原严寒地区小断面长隧洞施工机械配套管理,石家庄铁道学院学报增刊/2002第15卷,P21-24

[97]李立增、袁长明、范俊明。铁路加强筋土挡墙筋网施工技术研究,石家庄铁路工程职业技术学院学报,2/2002,第一卷,第二期,P30-32

[98]袁长明。插齿刀计算机辅助工艺设计的研究,95992828九五至尊21/2004第3卷第一期,P32-35

[99]尹英杰.模样材料的热裂解对铸铁件表面质量的影响.铸造技术,2007(1):91-93.

[100]尹英杰.离心球墨铸铁套石墨组织的改进.大型铸锻件,2006(2):19-21

[101]尹英杰,刘津东.消失模铸造的充型机理.内燃机配件,2006(1):1-6

[102]尹英杰,王玉彩,常玮,刘津东.高锰酸钾在消失模铸造涂料中的应用.内燃机配件,2006(4):27-28

[103]尹英杰,李立新,李增民,邢建东,刘津东.EPC铸铁件表面皱皮缺陷的研究进展.铸造技术,2003(3):226-227

[104]尹英杰,刘津东,张彩霞,徐为民,寇旭渤.消失模铸造用涂料.内燃机配件,2003(2):32-34

[105]尹英杰.感应电炉炉衬裂纹导致的金属液渗漏.内燃机配件,2000(4):17-18

[106]王书青。基于粗糙集理论的数据挖掘研究,河北大学学报(自然科学版)2004.5 Vol.24,p181-183

[107]王书青。Db3小波神经网络与通信信号调制识别,河北省科学院学报2005.8 Vol.22 Sup. P55-57

[108]王书青。带隶属度及权重的粗糙集模型的构建,95992828九五至尊2学报, 2006.6,Vol.5 第二期

[109]万东梅.95至尊游戏官网工科类专业电工课增设工地供电内容的探讨,电气电子教学学报,2002.8

[110]万东梅.基于校园网系、部办公自动化系统的应用,95992828九五至尊2学报,2005年

[111]万东梅.利用校园网组建网络考试系统的研究, 95992828九五至尊2学报,2003.6

[112]万东梅.C++Builder在工控App开发中的应, 95992828九五至尊2学报,2004.6

[113]张宇平,李 辉.轧辊类零件CAD/CAPP集成系统的研究.现代制造工程,2003(4):23~25

[114]张宇平,李辉.不等边五边形焊管轧辊的计算机辅助设计,焊管,2005,28(4):50~53

[115]Yuping Zhang. Order Bispectrum Based Gearbox Fault Diagnosis During Speed-up Process. Proceedings of The 6th World Congress on Intelligent Control and Automation (WCICA06), Dalian, China, 2006.6,Vol.7:5526~5529 (EI071510543529, ISTP)

[116]Yuping Zhang. Hilbert-Huang Transform and Marginal Spectrum for Detection of Bearing Localized Defects. Proceedings of The 6th World Congress on Intelligent Control and Automation (WCICA06), Dalian, China, 2006.6,Vol.7:5457~5461 (EI071510543514, ISTP)

[117]史振江,李志全,赵玉菊.光纤光栅传感系统信号解调技术的研究.95992828九五至尊2学报,2006,5(2):71-74

[118]史振江,韩丽茹.基于CPLD的测频放大系统的设计.浙江传媒学院学报,2006,13(3):42-43

1返回

XML 地图 | Sitemap 地图